2025 Garmin Marine Fusion Signature Series Marine Amplifiers Signature Series 6 Channel 1500-Watt Marine

Information

2025 Garmin Marine Fusion Signature Series Marine Amplifiers Signature Series 6 Channel 1500-Watt Marine

EXPERIENCE THE POWER OF MUSIC

Purpose-built for the marine environment, the Signature Series marine amplifiers feature some of the most impressive protection from the environment available — delivering a Signature performance out on the water.

Features may include:
  • Class-D amplifier design delivers higher efficiency and greater output.
  • Connect up to two speakers per channel at 2 ohms, or bridge two channels at 4 ohms for increased power.
  • Conformal coated PCBs provide extra protection from the marine elements.
  • Rigid aluminum alloy heat sink is molded for greater dissipation of heat.
  • The amplifiers are available in monoblock, 4 channel, 5 channel, 6 channel and 8 channel configurations.
  • Engineered to last season after season, the amplifiers include a supported 3-year warranty.

Photos

Highlights

  • Pasadena, Maryland
  • 2025
  • Garmin Marine
  • Fusion Signature Series Marine Amplifiers Signature Series 6 Channel 1500-Watt Marine
  • Available

Specifications

  • 2025
  • Garmin Marine
  • Fusion Signature Series Marine Amplifiers
  • Signature Series 6 Channel 1500-Watt Marine
  • Miscellaneous
  • Physical dimensions (LxWxH): 16.54" x 8.27" x 2.24" (420 x 210 x 57 mm)
  • Peak power (Watts): 1500 W | Total rated power output - 4 Ohm (Watts): 100 W RMS x 6 @ 14.4 V input - 4 Ohm < 1% THD | Total rated power output - 2 Ohm (Watts): 140 W RMS x 6 @ 14.4 V input - 2 Ohm < 1% THD | Total rated power output (Watts): 280 W RMS x 3 @ 14.4 V input - 4 Ohm Bridged < 1% THD | Frequency response: 10 Hz - 40 kHz (-3dB, dB @ 4 Ohm rated power) | 6/8 channels and 24-Volt 6 channel: 10 Hz - 40 kHz (-3dB, dB @ 4 Ohm rated power) | Input sensitivity: 0.3 V - 8 V RMS (user adjustable) | Input impedance: 7k Ohm nominal | HP variable crossover frequency: 32 Hz - 320 Hz | LP variable crossover frequency: 32 Hz - 320 Hz | Operating voltage: 10.8 V - 16 V DC | Current consumption (StandBy): < 1 mA @ 14.4 V input | Current consumption (Idle): < 2.5 A @ 14.4 V input | Current consumption (Max): 75 A | Fuse rating: 3 x 40 A ATC blade-type (SAE J1171 compliant)
  • 32° to 122° F (0° to 50° C)
  • Amplifier class: D | High-pass/low-pass full range filter: yes (user selectable)
  • 3 years